Säkerhet och övervakning/Dörrklockor/Videodörrklockor

Smartlife Video Porttelefon

Wi-Fi | Transformator | Full HD 1080p | microSD (ingår inte) / Molnlagring (tillval) | IP54 | Med rörelsesensor | Nattsikt | Grå / Svart

Egenskaper

Tillverkarens artikelnummer: WIFICDP10GY
Streckkod: 5412810311323
• Skickar pushmeddelanden till din smartphone om någon närmar sig dörren (rörelsedetektor) eller ringer på klockan
• Rörelsedetektorn kan avaktiveras (t.ex. om dörren leder direkt ut till en gata)
• Tvåvägskommunikation innebär att du kan prata med dina besökare var du än befinner dig
• Full HD-inspelning (1080 p) och digital zoom på din smartphone ger dig en detaljerad bild
• Drivs med 12-24 V AC - använd ledningarna till din befintliga dörrklocka
• Inspelningar lagras på MicroSD-kort upp till 128 GB (ingår ej) - se vad som hände i efterhand
• Vinkeljustering ingår för att få bästa siktvinkel
• Ingår i Nedis® SmartLife-app
• Kan utökas med en trådlös ringklocka (WIFICDPC10BK - ingår ej) som gör att du kan höra dörrklockan när du är hemma, oavsett var din telefon är
Med den här smarta dörrklockan med kamera från Nedis SmartLife vet du alltid när någon står utanför din dörr, oavsett var du befinner dig. När din besökare ringer på dörrklockan, eller bara närmar sig din ytterdörr, får du, tack vare rörelsedetektorn, ett pushmeddelande på din smartphone. Då kan du inleda ett videosamtal, be ett bud att lämna paketet hos din granne eller tala om för en försäljare att du inte är intresserad, utan att ens öppna dörren.
Eftersom du kan svara var du än befinner dig i världen så länge som din smartphone har en internetuppkoppling, ökar det också hemsäkerheten eftersom det ser ut som att du är hemma.
Full HD-kameran (1080 p) har en siktvinkel på 130 ° och bildförstärkning, vilket gör att du tydligt kan se vem som står utanför dörren, dygnet runt.
Du behöver inte oroa dig för att du inte ska hinna till dörren. Bilderna lagras på ett microSD-kort och du kan titta på dem när du vill.
Den trådlösa dörrklockan med kamera är enkel att installera via ledningarna till din befintliga dörrklocka. Vinkeljustering ingår för att montera dörrklockan i en optimal position.
Utöka dörrklockan med kamera med vår enhet med Nedis ringklocka (WIFICDPC10BK) så kan du höra ringsignalen även om din smartphone är avstängd.

Förpackning

Paketet innehåller

Dörrklocka med kamera
Vinkel för montering på vägg
Vinkeljusteringsadapter
Installationsmaterial
Snabbstartsguide

Storlek på förpackning Presentask med eurolock

Bredd Höjd Längd
140 mm 93 mm 66 mm

Förpackningsstorlek

Antal/kartong Bredd Höjd Längd Vikt
1 70 mm 120 mm 140 mm 208 g
40 300 mm 360 mm 410 mm 8900 g

Produktspecifikationer

Bredd 44 mm
Höjd 28 mm
Djup 114 mm
Vikt 112 g
Färg Svart
Grå
Maximal antennförstärkning 0 dBi
Ingångsström 1.0 A
Strömkabel sida B Micro USB
Strömbakel sida A USB
Material Plast
Maximal ström konsumtion 4 W
Moln inspelnings funktionalitet Ja
Kompatibel med Nedis® SmartLife
LED 1
Maximal upplösning Full HD 1080p
Nattsikt 10 m
Maximal sändningseffekt 18 dBm
Lins 3.2 mm
Betraktningsvinkel 130 °
Med rörelsesensor Ja
Justerbar volym Ja
Tillbehör Justering av vinkel
Enhetens ströminmatningsanslutning 2-wire
Typ av strömkälla Transformator
App tillgänglig för Android™
IOS
Bildchip 1/2.9” CMOS
Sänd frekvensområdet 2400 - 2484 MHz
Lagringstyp Molnlagring (tillval)
microSD (ingår inte)
Inträngningsskydd IP54
Trådlös teknologi som stöds Wi-Fi
Antal melodier 4 Melodier
Drifttemperaturens omfång -20 - 50 °C
Antal varor i paketet 1 st.
Inspänning 12 - 24 V AC

Support

Vanliga frågor

Vi har hittat följande frågor åt dig på engelska

This video doorbell can indeed be powered by the existing doorbell transformer (12 - 24 VA, 1A minimum on all Voltages). But it is necessary to bypass or remove the wired gong so that the video doorbell is connected directly and exclusively to the doorbell transformer.

This can be used to provide the camera with power during testing before mounting it next to the door.

No, it does not have an internal battery and it needs to be connected to power at all times.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

The video doorbell does not receive enough power. Typically this is due to loss on the cables. A power supply with a higher Voltage and Amperage can compensate for this loss.

Plaats de gong zo dicht mogelijk bij de video deurbel tijdens de installatie
Druk kort op de knop van de gong zodat het blauwe lampje blijft knipperen. Als u meerdere heeft laat u ze allemaal knipperen.
Ga naar het menu van de deurbel zelf (tik op deurbel: live beeld > rechtsboven op "pen met streepje"
Ga naar instellingen bel
Als er reeds een menu staat (tone, volume etc) dan drukt u eerst op verwijderen
Druk dan op toevoegen.
Vrijwel direct verschijnt het menu.
Ga terug naar het hoofdmenu en test de deurbel.

- Go to the settings menu of the video doorbell

- Select doorbell settings

- Place the gong really close to the doorbell

- Give the button on the bottom of the gong a short press: the light will start flashing.

- Press the "add" button in the app (remove the tone/volume menu first if it is already there)

- The menu will appear.

- Select another tone and ring the doorbell to test

See if it resets if you connect it to a USB charger. If it does, then you will need to replace the power supply. The current power supply is not able to get enough power to the video doorbell.

Your power supply can't provide enough power to the WIFICDP10GY. Please upgrade your power supply to compensate for the loss of the cables. We recommend a 12VAC/1A or higher power supply.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

Yes you can, simply install them like you would install a single one.
The difference is that you need to make all the gongs blink at the same time before you press add in the app.

No, you can't change the volume of the doorbell.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

If your phone is locked, you will only get a notification.
You can tap on this notification to go directly to the live view of the doorbell.
If the app is opened, you will get a screen as if someone is calling you.

The port is located on the bottom of the doorbell.
Use this port with a micro USB charger to install it indoors.
After it's installed you can mount it on the door again.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

You can add maximum 20 members.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.