SmartLife Video Dørtelefon
Wi-Fi | Batteri | Full HD 1080p | Cloud Storage (mulighed) / microSD (ikke inkluderet) | IP54 | Med bevægelsessensor | Nattesyn | Grå
Funktioner
• Batteridrevet - sikrer en 100 % trådløs løsning • Bevægelsesregistrering kan også deaktiveres (f.eks. hvis døren vender direkte mod gaden)
• 2-vejs kommunikation, så du kan tale med dine gæster, uanset hvor du befinder dig
• Full HD-optagelser (1080 p) og digitalt zoom på din smartphone, så du kan få vist en detaljeret oversigt
• Optagelserne gemmes på et MicroSD-kort op til 128 GB (medfølger ikke) - se, hvad der er sket tidligere
• Integreret i Nedis® SmartLife-appen
• Kan udvides med trådløs dørklokke (WIFICDPC10BK - medfølger ikke), så du kan høre dørklokken, når du er hjemme, uanset hvor telefonen er
Du kan svare fra ethvert sted i verden, så længe din smartphone har en internetforbindelse, hvilket øger sikkerheden i hjemmet, da det ser ud som om, at du er hjemme.
Full HD-kameraet (1080 p) har en 180° visningsvinkel og understøtter nattesyn, så du tydeligt kan se, hvem der står uden for døren 24 timer i døgnet.
Og du kan tage det roligt, hvis du ikke har tid til at åbne døren. Billederne gemmes på et microSD-kort, så du kan se dem når som helst.
Denne 100 % trådløse dørklokke er nem at installere, da den er batteridrevet og derfor ikke behøver nogen forbindelse undtagen Wi-Fi.
Få mere ud af denne dørklokke med video med vores Nedis-dørklokke (WIFICDPC10BK), så du kan høre ringelyden, selv hvis din smartphone er slukket.
Emballage
Pakkens indhold
Videodørklokke
Vægbeslag
USB-kabel
Installationsmaterialer
Lynvejledning
Detail mål på pakker Gaveæske med eurolock
Bredde | Højde | Længde |
---|---|---|
162 mm | 95 mm | 100 mm |
Logistik dimensionerne
Pakket per | Bredde | Højde | Længde | Vægt |
---|---|---|---|---|
1 | 105 mm | 120 mm | 165 mm | 377 g |
10 | 335 mm | 120 mm | 495 mm | 4100 g |
20 | 355 mm | 265 mm | 510 mm | 8860 g |
Produktspecifikationer
Bredde |
50 mm |
Højde |
141 mm |
Dybde |
33 mm |
Vægt |
225 g |
Enhedens strømindgangsforbindelse |
Micro USB |
Indgangsstrøm |
1.0 A |
Strømkilde type |
Batteri |
Strømkabel side B |
Micro USB |
Strømkabel side A |
USB |
Farve |
Grå |
Materiale |
Plastik |
Cloud optagelsesfunktionalitet |
Ja |
Nattesyn |
5 m |
Kompatibel med |
Nedis® SmartLife |
LED |
1 |
Indgangsspænding |
5 V DC |
Maksimal transmissionsantenneforstærkning |
2 dBi |
Maksimal opløsning |
Full HD 1080p |
Med bevægelsessensor |
Ja |
Tilbehør |
Installationsmateriale |
Nødvendige batterier (inkluderet) |
2x 18650 |
App tilgængelig til |
Android™ IOS |
Billedchip |
1/2.9” CMOS |
Frekvensområde |
2412 - 2472 MHz |
Maksimalt strømforbrug |
2 W |
batterikapacitet |
5200 mAh |
Lagringstype 1 |
microSD (ikke inkluderet) Cloud Storage (mulighed) |
Maksimal transmissionseffekt |
13 dBm |
Kapslingsklasse |
IP54 |
Betragningsvinkel |
180 ° |
Objektiv |
1.4 mm |
Understøttet trådløs teknologi |
Wi-Fi |
Driftstemperaturområde |
-20 - 50 °C |
Antal produkter i pakken |
1 stk. |
Maks. batteritid |
4 måned |
Antal melodier |
1 Melodi |
Support
Ofte stillede spørgsmål
Vi har fundet følgende spørgsmål til dig på engelsk
How do I pair the gong to the WIFICDP20xx doorbell?
1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range
Can I adjust the volume and tone of the WIFICDPC10BK wireless chime?
Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.
I can't find the doorbell settings menu to pair the gong.
Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.
Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.
It is not possible to change the tone and volume on this doorbell model.
Can I use a really fast ultra/extreme/Evo/pro/canvas memory card in this device?
These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.
The camera does not recognise the QR code
Please try the EZ mode installation
Reset the camera by holding down the reset button until you hear the sound
Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation
Can I give other people access to my Smartlife devices too?
Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)
If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.
My Smartlife products lose the Wifi connection every time.
This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.
Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.
Does it work with Google Home (HUB)?
No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.